Hantek 80-250MHz Digital Oscilloscope 4CH 1GS/s +64K Digital Storage + EXT + DVM

Description

4CH digital storage oscilloscope, 100MHz bandwidth, minimum measurement range 500μV /div, 1GS/s sample rate，advanced digital trigger system, high trigger sensitivity, low trigger jitter，high resolution and 7 inch 64K color TFT(800*480).
Features:
4CH oscilloscope + EXT + DVM + auto range function.
100MHz bandwidth, minimum range is 500μV /div and 1GS/s sample rate.
Over 32 types of auto measurement function.
Advanced digital trigger system, high trigger sensitivity.
Over 14 types of trigger function: edge, overtime, pulse, pattern, interval, etc.
Integrated USB Host/Device, convenient to communicate with PC. Support U-disk storage/system update.
Support a variety of SCPI remote control command.
Stable and reliable quality, sturdy and durable.
Specifications:
Model
DSO4104B
Bandwidth
100MHz
Horizontal
Sample Rate Range
1GS/s
Waveform Interpolation
(sin x)/x
Record Length
Maximum 64K samples per single-channel;
Maximum 32K samples per dual-channel (4K, 32K optional)
SEC/DIV Range
2ns/div~100s/div
1, 2, 5 sequence
Sample Rate and Delay Time Accuracy
±50ppm
Delta Time Measurement Accuracy (Full Bandwidth)
Single-shot, Normal mode
±(1 sample interval +100ppm × reading + 0.6ns)
>16 averages
±(1 sample interval + 100ppm × reading + 0.4ns)
Sample interval = s/div ÷ 200
Vertical
AD Converter
8-bit resolution, each channel sampled simultaneously
VOLTS/DIV Range
500μV/div to 10V/div at input BNC
Position Range
500μV/div~20mV/div, ±400mV
50mV/div~200mV/div, ±2V
500mV/div~2V/div, ±40V
5V/div~10V/div, ±50V
Selectable Analog Bandwidth Limit, typical
20MHz
Low Frequency Response (-3db)
≤10Hz at BNC
Rise Time at BNC, typical
＜3.5ns
DC Gain Accuracy
±3% for Normal or Average acquisition mode, 10V/div to 10mV/div
±4% for Normal or Average acquisition mode, 5mV/div to 500μV/div
Note: Bandwidth reduced to 6MHz when using a 1X probe.
Acquisition
Acquisition Modes
Normal, Peak Detect, Average and HR
Acquisition Rate, typical
Up to 2000 waveforms per second per channel (Normal acquisition mode, no measurement)
Single Sequence
Acquisition Mode
Acquisition Stop Time
Normal, Peak Detect
Upon single acquisition on all channels simultaneously
Average
After N acquisitions on all channels simultaneously, N can be set to 4, 8, 16, 32, 64 or 128
Trigger
Mode
Auto, Normal
Level
CH1~CH4
±4 divisions from center of screen
EXT
0~3.3V
Holdoff Range
20ns ~ 10s
Trigger Level Accuracy
CH1~CH4
0.2div × volts/div within ±4 divisions from center of screen
EXT
± (6% of setting + 40mV)
Edge Trigger
Slope
Rising, Falling, Rising&Falling
Source
CH1~CH4/EXT
Pulse Width
Polarity
Positive, Negative
Condition(When)
<, >, ≠, =
Source
CH1~CH4
Width Range
8ns ~ 10s
Resolution
8ns
Slope Trigger
Slope
Rising, Falling
Condition(When)
<, >, ≠, =
Source
CH1 ~ CH4
Time Range
8ns ~ 10s
Resolution
8ns
Video Trigger
Signal Standard
NTSC, PAL
Source
CH1 ~ CH4
Sync
ScanLine, LinrNum, OddField, EvenField and AllField
Overtime Trigger
Source
CH1 ~ CH4
Polarity
Positive, Negative
Time Range
8ns ~ 10s
Resolution
8ns
Window Trigger
Source
CH1 ~ CH4
Pattern Trigger
Pattern
0: Lower level; 1: High level;
Level
CH1 ~ CH4
Interval Trigger
Slope
Rising, Falling
Condition(When)
<, >, ≠, =
Source
CH1~CH4
Time Range
8ns ~ 10s
Resolution
8ns
Under Amp
Polarity
Positive, Negative
Condition(When)
<, >, ≠, =
Source
CH1~CH4
Time Range
8ns ~ 10s
Resolution
8ns
UART Trigger
Condition(When)
Start, Stop, Data, Parity Error, COM Error
Source(RX/TX)
CH1~CH4
Data format
Hex
Condition(When)
<, >, ≠, =
Data Length
1 byte
Data Length
5 bit, 6 bit, 7 bit, 8 bit
Parity Check
None, Odd, Even
Idle Level
High, Low
Baud Rate (Selectable)
110/300/600/1200/2400/4800/9600/14400/19200/38400/57600/115200/230400/380400/460400 bit/s
Baud Rate (Custom)
300bit/s~334000bit/s
LIN Trigger
Condition(When)
Interval Field, Sync Field, Id field, Sync Id Error, Identifier, Id and Data
Source
CH1~CH4
Data format
Hex
Baud Rate (Selectable)
110/300/600/1200/2400/4800/9600/14400/19200/38400/57600/115200/230400/380400/460400 bit/s
Baud Rate (Custom)
300bit/s~334000bit/s
CAN Trigger
Condition(When)
Start Bit, Remote Frame, Data Frame Id, Frame Id, DataFrame Id A, Error Frame, All Error, Ack Error, Overload Fram
Source
CH1~CH4
Data format
Hex
Baud Rate (Selectable)
10000, 20000, 33300, 500000, 62500, 83300, 100000, 125000, 250000, 500000, 800000, 1000000
Baud Rate (Custom)
5kbit/s~1Mbit/s
SPI Trigger
Source(CS/CLK/Data)
CH1~CH4
Data format
Hex
Data Length
4, 8, 16, 24, 32
IIC Trigger
Source (SDA/SCL)
CH1~CH4
Data format
Hex
Data Index
0~7
Condition(When)
Start, Stop, No Ack, Address, Data, Restart
Inputs
Input Coupling
DC, AC or GND
Input Impedance, DC coupled
20pF±3 pF，1MΩ±2%
Probe Attenuation
1X, 10X
Supported Probe Attenuation Factors
1X, 10X, 100X, 1000X
Overvoltage Category
300V CAT II
Maximum Input Voltage
300VRMS (10X)
Measurements
Cursors
Voltage difference between cursors: △V
Time difference between cursors: △T
Reciprocal of △T in Hertz (1/ΔT)
Automatic Measurements
Frequency, Period, Average, Pk-Pk, RMS, PeriodRms, Min, Max, RiseTime, FallTime, + Width, - Width, + Duty, - Duty, Vbase, Vtop, Vmid, Vamp, Overshoot, Preshoot, PeriodAvg, FOVShoot, RPREShoot, BWidth, FRR, FFF, FRF, FFR, LRR, LRF, LFR and LFF
General Specifications
Display
Display Type
7 inch 64K color TFT (diagonal liquid crystal)
Display Resolution
800 horizontal by 480 vertical pixels
Display Contrast
Adjustable
Probe Compensator Output
Output Voltage, typical
About 2Vpp into ≥1MΩ load
Frequency, typical
1kHz
Power Supply
Plug Type
US Plug / EU Plug
(Optional)
Supply Voltage
US: 100-120VACRMS(±10%), 45Hz to 440Hz, CATⅡ
EU: 220-240VACRMS(±10%), 45Hz to 66Hz, CATⅡ
Power Consumption
<30W
Fuse
T, 3.15A，250V，5x20mm
Environmental
Operating Temperature
0~50°C (32~122°F)
Storage Temperature
-40~+71°C (-40~159.8°F)
Humidity
≤+104°F(≤+40°C): ≤90% relative humidity
106°F~122°F (+41°C ~50°C): ≤60% relative humidity
Cooling Method
Convection
Altitude
Operating and Nonoperating
3,000m（10,000 feet)
Material: ABS
Oscilloscope Probe Model: PP-80/150/200
Probe Length: Approx. 130cm / 51.2in
Power Cable Length: Approx. 150cm / 59in 
USB Cable Length: Approx. 107cm / 42.1in
Oscilloscope Size: 31.8 * 11 * 15cm / 12.5 * 4.33 * 5.9in(L * W * H)
Oscilloscope Weight: 2.9kg/ 6.4lb
Package Size: 38.5 * 20.5 * 25.5cm / 15.1 * 8.1 * 10in(L * W * H)
Package Weight: 3.97kg/ 8.75lb
Package List:
1 * Digital Storage Oscilloscope
4 * Oscilloscope Probes
1 * USB Cable
1 * Power Cable
1 * CD
Note:
Please read the instruction manual in CD carefully to avoid injury and prevent damage to this product.
E3243US